1 VZ-SnapCrane-16 Professional Modular Camera Crane Instruction Manuall For a video tutorial “SnapCrane Build, Design and Assembly”, go to
2 Parts List Crane Arm Sections 1) Tail Section (short) w/ sliding micro-adjust counterweight 2) Pivot Section w/ half-moon shaped brake plate 3) 2
3 SNAPCRANE MODE GUIDE Compact Mode (front pivot hole, use black cable 4) Arm Sections used: Front and Pivot sections only Camera capacity: up to 50
4 ***Option: If you want to reduce the amount of counterweight needed in SnapCrane-16 mode, you can shift the brake plate forward so you can use the
5 Extension Section 1 If using the Crane in the 2 shortest modes, you can skip this section and go to “Front Section.” Next you will need to attac
6 TAIL SECTION Attach the Tail section to the rear of the pivot section. Loosen the dovetail lock screw just enough to allow the two sections to e
7 Grab “Ext. Cable 1” and Clip the end with turnbuckle to the latch point at the rear of the tail section. Next, place the cable over the
8 Counterweighting and Mounting Remote Head & Camera Slide the weight bar through the hole at the back end of the tail section. There is a not
Comments to this Manuals